Itty Bitty Fidget 3Dモデル

Itty Bitty Fidget
If assembling one of the magnet versions of this fidget, press fit the magnets into the button and bottom case first. Make sure magnets are oriented to pull the button toward the bottom case. If the magnets are loose, glue them in.

The top and bottom pieces snap together. These snaps are very tight, so they may require some force to work.

Gluing the case shut is not recommended. If you do glue the case together, limit the glue to only the ends of the case. This is particularly important if you're printing the no-magnet version, as the case needs to flex slightly at the middle. 印刷　準備: いいえ