STL BATMAN BUST 3D PRINT
3Dプリントモデル

Contents : Winrar file to unzip

Pre-adjusted in 1/6 and 1/4 scale.

The 3D model is prepared and ready for 3D printing. Printing test performed on 1/6 scale and elegoo mars 2 pro printer.


1/4 scale stl file. 1/6 scale stl file (chitubox file with supports), the same one I used for printing tests.

You can use it as a reference to place your supports if you prefer.

Tip for a good impression.
Make sure your printer is calibrated, use the correct time for your resin/printer. After printing, wash the part and remove the supports with the help of pliers, remove carefully. Cure your piece of a finish with sandpaper. Paint and collect.

Thank you so much