switchcade nintendo switch 3Dプリントモデル

switchcade/!\ only stl files to 3d print /!\

improved version of my arcade base for nintendo switch, with joy-con placement and interchangeable faces. 7 parts to print, you need glued or screwed (8 screws required)


my cura setting :

toppart 4h40min, layer 0.2mm, infill 10%, support : yes

joy-con_cover 1h09min, layer : 0.2mm, infill 10%, support : no

frontpart_joy-con_placement 6h20min, layer 0.2mm, infill 10%, support : yes

sidea/b 5h45min, layer : 0.2mm, infill 10%, support : yes

sidecovera/b (cover for stickers placement) 5h37min, layer : 0.2mm, infill 10%, support : no