Cinema CS in N gauge 3Dプリントモデル

Cinema building (cinema), based on the beautiful building of the cinema in the town of Cerro Sombrero, Chile. It consists of the structure, the interior foyer with its box office, as well as the respective windows and doors. The real building has colored panels on its façade which are reproduced to scale in this model.

The scale is 1:150 which makes it suitable for model electric trains in N scale. It is made up of several STL files compressed in a single ZIP file.

Main features of the model:

The building can be printed on any type of printer as versions have been made for both 20x20 and larger sizes.

Two versions of the interior foyer (with and without holes) to apply lighting.

Categorized and ordered STL files, with recommended colors named in English.

It has the option of placing both the "Cinema" sign as well as the "Cinema" sign, in Spanish (in the original building it is "Cine").

Supports: Set to print without supports in general but in the main structure, it is recommended to occupy supports despite being in plate format.

It is recommended to print in PLA material and in the best possible quality (0.1 mm).

Recommended colors: those named in each STL file. Note: they are in English.

Optimized for printers of any type.

The categories of each piece are in different STL files.

Although the holes are designed for the correct insertion of windows and doors, the highest quality should still be used to print the latter, and the holes may need to be sanded or polished if necessary.

Dimensions:

Base measurements: 23.7 x 13.1 cm.
building measurements: 20.5 x 10.5 x 6.8 cm.

Glue should be used to attach windows, doors, base and roof, preferably UHU.

It does not include glass transparency, it is suggested to use mica or acetate.

3D PRINTING PARAMETERS
Extrusion temperature: 195-200º
Material: Any, but preferably PLA
Bed temperature: 55-60º
Does it require support?: No, only in the main structure.